| Customization: | Available |
|---|---|
| After-sales Service: | Engineers Available for Technology Assistence |
| Warranty: | 12 Months |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Heat pump type van sludge drying system,sludge dryer,sludge drying machine,sludge treatment,sludge cake,sewage dryer,sludge dryer machine
van type sludge dewatering sludge drying machine sludge dryer
Project Site------------sludge dryer sludge drying machine sludge drying system
Descriptions
Heat pump van sludge dryer is a standardized sludge drying system with a standard size.We employ a complex combination of powerful dehumidification and targeted air pathways to obtain consistent and reproducible drying results, done in closed systems completely independent of environmental factors.The system operates in fully automatic mode through electronic humidity control.
Optional:Sludge hopper device
Sludge with different characteristics vary greatly in drying and ventilation performance, and its filtration height varies greatly.In order to control the air flow rate to achieve optimal dehumidification effect, we developed a variety of hopper devices which is optional.
Process flow diagram of heat pump-type van sludge dryer
Characteristics of the heat pump-type van sludge dryer
Deep dehydration,reduction infinite
Multi-stage energy comprehensive treatment, strong drying reduction capacity, reduction can be up to more than 80%.break the technical bottleneck of dry mud's high water content and weak reduction ability existing in the traditional drying mode.
Efficient dehumidifying,no-worry about the cost
Multiple invention patent innovative design,highly efficient and energy-saving,each kilowatt of power dehydration can reach more than 4 kg per hour,and can save more cost.Compared with the traditional low-temperature drying equipment,this drying equipment can save the cost of more than 50%.
Closed circulation,environment friendly
Utilize closed drying design, no odor discharge,there's no need to install expensive deodorization system which will increase the cost, can be directly installed in the plant for centralized sludge disposal, low condensate COD and simple treatment.
Hot and heat balance,energy saving and consumption reduction
Adopt energy comprehensive application technology, cold and heat balance treatment and utilization, no heat loss, more excellent system work energy efficiency,which is different from the continuous wet drainage and heat dissipation, continuous high temperature heat supply drying equipment.
Heat pump drying,dust-free and no explosion
Heat pump fully closed low-temperature dry operation, safe and environmental protection, no dust and explosion risks, temperature of outlet materials is less than 48°c,no need for secondary cooling, can be directly stored.
Overall varieties,flexible drying
Ranges from 3kg-1000kg per hour to meet the drying requirements of different places.At the same time, the product is a comprehensive anti-corrosion design, to ensure the quality of the product, the service life is longer.
Free setting,drying adjustable
Freely set the drying time and drying temperature, to meet the unnecessary dry water content is the requirement, control the drying degree is more accurate, to solve the uncertainty of traditional drying time and inaccurate drying degree and other difficulties.
| Model KC- | 10IIJ4d | 18IIJ4d | 33IIJ4d | 38IIJ4d |
| Standard water reduction kg/24h |
200 | 400 | 800 | 900 |
| water removal capacity/h | 8-15kg | 15-25kg | 30-35kg | 30-35kg |
| Operation power kW |
3.5 | 6 | 12 | 14 |
| installed power kW |
6.5 | 10.5 | 21 | 23 |
| energy consumption kg.h2O/KW.h |
2.0~4.0 | |||
| Number of compressors set |
1 | 1 | 1 | 1 |
| Hopper outside size mm |
800*800*750 | 900*860*1000 | 1250*1250*1250 | 1250*1250*1250 |
| cooling-down method | air cooling(Optional water cooling) | |||
| cryogen | R134a | |||
| electrical source V/Hz |
380V/3N ~ 50Hz | |||
| Drying temperature ºC |
40~50ºC(return wind)/60~80ºC(wind deliver) | |||
| control system | touch screen+single chip machine | |||
| Application range of wet sludge |
water content(40%-82%)(different water content has different adaptability) | |||
| Water content of dry material % |
10%~40% | |||
| Forming Mode | Stripe,Squeeze(Different water content,Muddiness shall be suitable for selection) | |||
| External dimensions mm |
1700*1500*1700 | 2118*1622*2000 | 2800*1900*2300 | 2800*1900*2300 |
| Structural style | Unassembled(When using the water-cooled mode,assembled) | |||
| weight kg |
650 | 1000 | 1550 | 1650 |
Q: Are you trading company or manufacturer?
A: We are factory. We are professional manufacturer which specializes in producing waste water treatment equipments.
Q: Where is your factory located?
A: Yangzhou City, which is very close to Shanghai with only less than 3 hours' driving.
Q: Do you provide OEM service?
A: Yes. Any required logos are available.
Q: How about the production capacity of your company?
A: We produces machines more than 30000 sets per year.
Q: How could we trust you and your company? This is first time transaction?
A: Our company has long term professional experience. We cooperate over 1000 customers in China and overseas. We export nearly 40 countries all over the world. Welcome to our company and visit our plant production condition any time.
Q: Do you offer after-sales service?
A: Yes. Engineers available for technology assistence.
Q: How long is your warranty?
A: One year after the arrival of the goods.
Q: What about your delivery Time?
A: Normally within 45 days against down payment.
Q: What about the package of your export product?
A: Normally we use anticorrosion wooden case.
Q: What kind of payment do you accept?
A:Normally we do T/T, L/C.
Q: What kind of transportation do you offer?
A: Customers decide freight mode, Air&express & Sea .
){kind=link}